need help with inside saber

[2saberjedi]

(bow)

I'm looking into the parts I'm going to need 4 the inner workings 4 my sabers I'm going to have random sabers build them as there stunt saber with a 3/4 in bore inside all the way out with a removable end cap but i need to know what I'm going to do n the inside ...i know theres sites with the parts I'm going to need but i need to know how to put it together like what parts so connected to what and so on

if any 1 would take the time to draw what this would look like and list the parts and wires i need that would be great I'm looking to buy the parts from the custom saber shop website

so if u could either leave the list on here or e-mail it to me i would be great full

[Starkindler (The Naked Jedi)]

if you mean Electronics for a lighted blade then you can check outeither:
www.thecustomsabershop.com (the TCCS)
OR
www.youcanknow.org/corbin/ (Corbin's components)

for diagrams, instructions, parts, etc.

TCCS has an extensive forum with info on how2 and why4...

[2saberjedi]

(bow)

Thank you im looking at Corbins site now and im reading Basic Wiring and trying not to blow my head up from thinking

May The Force Be With You

[Leda EmBorr]

Good luck to you...

Be sure to check out the Saber Electronics forum:

apfoister.proboards9.com/index.cgi?board=propel

There's alot of info there!

[Starkindler (The Naked Jedi)]

if there is a reputable electronics repair shop in your area you could probably have them do the soldering and wiring for a small fee...then you could do the installation.

RandomSabers can do the installation for you if you send them the parts.........

[JediKai]

2saberjedi said:

(and trying not to blow my head up from thinking

duct tape works wonders in preventing your head from exploding. Just ask Mon-Jas.

[2saberjedi]

(bow)

hahaha im goinf to have to rember that when the time comes


May The Force Be With You