Slyander
Message Board Member
Message Board Member
Posts: 12
|
Post by Slyander on Feb 14, 2004 16:28:55 GMT -5
Hi could you tell me how to make a really simple lightsaber because me and my friends are making a fan film and there is a big Jedi Fight and I've tried carving in wood but takes to long i've made some good ones but take about half an hour ! I'm going to make a sort of sith v jedi war ! Slyander ;D ;D
|
|
Argento
Message Board Member
Message Board Member
The Heavy Metal Jedi
Posts: 126
|
Post by Argento on Feb 14, 2004 20:23:04 GMT -5
hi! well, is not too hard to make a simple lightsaber you cand do it with some PVC pipes and some paint. Just go to your hardware shop and check the PVC pipes and joints. For my lsat lightsaber i used a 3/4'' tube, a 3/4'' - 1/2'' addapter (female - female), a 1/2'' tube, a 1/2'' - 3/4'' adapter (female - male) and a 3/4'' joint (female - female ). I used a mouse pad to make the grip (cheap and really cool looking), and silver paint to make it look like metal. Much easier than carving in wood! ;D check this page, it will help you a lot: jedifather.tripod.com/PloKoonTutorial.html
|
|
Slyander
Message Board Member
Message Board Member
Posts: 12
|
Post by Slyander on Feb 15, 2004 6:37:17 GMT -5
Thanks thats a great site I bookmarked it
|
|
JediKai
Message Board Member
TJA Savior
Posts: 5,560
|
Post by JediKai on Feb 15, 2004 12:22:30 GMT -5
|
|
Slyander
Message Board Member
Message Board Member
Posts: 12
|
Post by Slyander on Feb 15, 2004 14:47:18 GMT -5
I've already been on that site but it doesn't tell you HOW to make it thanks anyway
|
|