Post by Koda Vonnor on Jul 11, 2007 20:56:30 GMT -5
Here's an update on the screen accurate Bryar pistol for Kyle Katarn. 
I just finished the final shaping, cutting and painting on the mod parts...
All of the mod parts are PVC, most of them custom machined. The black "U" shaped cover plate was bent to shape by dipping it in boiling water and bending it around a metal tube. That in itself took me a whole day.
I also got the AirSoft pistol blank masked and painted and ready to attach the mod parts. I used the same model as for the bigger NEGWT Bryar. I've already attached the receiver fins and the ammo clip, since those are screwed in from the inside and I had to perma-glue the gun halves together before painting.
The white strips on the sides are styrene sheeting. I had to put them in as spacers so the ribbed barrel heat-sink section will fit tight over the top of the barrel. When the paint dries enough I'll post some intermediate assembly photos and the finished blaster.
~ Vonnor
I just finished the final shaping, cutting and painting on the mod parts...
All of the mod parts are PVC, most of them custom machined. The black "U" shaped cover plate was bent to shape by dipping it in boiling water and bending it around a metal tube. That in itself took me a whole day.
I also got the AirSoft pistol blank masked and painted and ready to attach the mod parts. I used the same model as for the bigger NEGWT Bryar. I've already attached the receiver fins and the ammo clip, since those are screwed in from the inside and I had to perma-glue the gun halves together before painting.
The white strips on the sides are styrene sheeting. I had to put them in as spacers so the ribbed barrel heat-sink section will fit tight over the top of the barrel. When the paint dries enough I'll post some intermediate assembly photos and the finished blaster.
~ Vonnor
